As the terminal board does not require any specific resources, no map file is needed for this board. All signals present on the SPIP header, to which the peripheral is attached, are likewise present on both the terminal and JST 1mm connector (all pins are mapped one to one). Note that PIEP uses pin 9 as ground on all ten-position connectors, by default. Due to the board's height, this peripheral must be either top mounted or remote mounted. In lieu of a breakout board, the 1mm JST connector can be used as the second connection point for remote mount applications. Max voltage / current on the SPIP pins and terminal connector are 1 Amp / 24 Volts. Do not exceed 24 Volts and ¾ Amps on the JST 1mm connector.
| 311-002-terminal-board.pdf |
